Monitor mount removal and installation

The monitor mounts on either the left(shown) or right side. It secures to either the ground or free stand plate(shown) as well as the leg of Proteus.

1. Before removing the mount assembly, first disconnect the 2 USB cables that connect near the leg attachment.

2. Then on the opposite side remove the  opposite side access panel if needed and  disconnect the monitor power cable.

3. Now the 2X bolts securing it to the leg can be removed.

4. Lastly remove the 2X bolts securing the mount to the ground. If the free stand plate(shown) is present, the mount can be moved with the plate attached.

Reattaching the monitor is similar. You will:

1. First plug but the monitor power and 2X USB cables in and tuck them out of the way to avoid damage.
2. Align and secure the 2X leg mounting bolts first to set the position.
3. Once secure, the 2X ground bolts or similar can be installed.