Software How To's
      Back to home
      1. Help Resources
      2. Software How To's

      Switching from WiFi to Ethernet

      1. With your Proteus turned on, navigate to "Configure Proteus"
        Screenshot 2023-10-25 123448
      2. Click "Open Settings" from the top right under System Control
        Screen Shot 2023-12-08 at 12.03.13 PM
      3. Select Network and Internet -> WiFi
        Screen Shot 2023-12-08 at 12.03.47 PM
      4. Select the WiFi your Proteus is connected to and tap "Forget"
        Screen Shot 2023-12-08 at 12.05.50 PM
      5. Now turn off your Proteus and run your Ethernet cable from your Router to Proteus,  find the RJ45 port based on how your Tablet matches in the below images.
        Screenshot 2023-10-18 at 11.42.03-1 image (4)-2
        Note: Plug the cable directly into the tablet, NOT the USB hub mounted to the tablet.

      6. Turn on Proteus, go through Sensor Orientation, and tap "Configure Proteus" again
      7. Verify your ethernet connection is working via the bottom left corner
        1. Connected?: true
        2. Connection type: EthernetScreen Shot 2023-12-08 at 12.07.12 PM
      8. Tap "Exit to Training View" and start training to further confirm ethernet is working as expected